SP60-8B Syringe Pump Series

Présentation du produit

It is a programmable, open-architecture, precision liquid handling unit, which is controlled by external computer or microprocessor to realize automatic pipetting, dilution and dispensing functions.

  • Simultaneous processing multiple liquids
  • Photoelectric encoder detects out of step
  • Controllable start speed, maximum speed and stop speed
  • Programmable acceleration and deceleration slopes
  • Can realize planned maintenance and replacement of syringes

Paramètres techniques

Précision Error ≤±0.1%(stroke≥30% maximum stroke)
Max. stroke(Steps) 60mm(6000 steps or 48000 steps)
Linear speed range 0.01mm/s-60mm/s
Run time per stroke 1.25s-100min
Résolution de vitesse 0.01mm/s
Stroke resolution 0.01mm or 0.00125mm
Valve switch time ≤250 ms between adjacent ports
Valves type Electromagnetic valve
Valve material Valve body: PEEK; Diaphragm: FKM; Sealing ring: FKM
Tubing fittings 1/4-28UNF
Syringe fittings 1/4-28UNF
Alimentation électrique DC24V±10%/2.5A(Peak value)
Interface de communication RS232/RS485/CAN
Syringes 50μL, 100μL, 250μL, 500μL, 1.0mL, 2.5mL, 5.0mL
Syringe material Barrel material: Borosilicate glass; Plunger rod material: Stainless steel; Plunger seal material: PTFE
Baud rate 9600 or 38400(RS232/RS485); 100K, 125K, 250K, 500K, 1M(CAN)
Addressing UP to 15 individual addresses available(BCD switch)
Input Two TTL level signal inputs, for restart the paused instruct
Résultat Three TTL level signal outputs, for synchronous external devices
Valve body rated pressure 0.2MPa
Température ambiante 15°C~40°C(Low temperature operation requires a low temperature syringe)
Storage temperature -20°C~65°C
Humidité relative <80%(RH)
Numéro de canal 8
Dimensions (L × l × H) 196*140.5*252

Dimensions(unité : mm)

Tutoriels vidéo

Transmission Liquid Demonstration
Transmission Liquid Demonstration