1. Accueil
  2. Syringe Pump Series
  3. Syringe Pump Series

SPM/4*ZU-I Syringe Pump Series

Présentation du produit

4.3 inch touch screen control, compact design. Display 8 pump units working parameters and working state in same screen. Friendly interface, easy operation. Split design, mainly for laboratory.

  • Each unit working independently, can set one or some units freely. Each unit can infuse or withdraw different volume in same time or different time.
  • Intelligent calibration, ensure infuse volume accuracy. Online micro adjusting function, convenient to adjust the volume of one units, decrease volume error.
  • Real time monitor, animate display monitor result. Controller can receive traffic alarm of each unit.
  • Back distance setting, can exclude bubbles inside syringe, improve volume accuracy.
  • Fast forward and backward function used for loading syringe, washing and unlock traffic protection.

Paramètres techniques

Working mode (Five) Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion.
Groupe de pompage 1-8 optional
Syringe size Plastic syringe: 1mL-50mL; Glass syringe: 0.5μL-50mL
Syringe selection Syringe size and customized diameter
Linear speed range 1μm/min-132mm/min (Flow rate=Linear speed* syringe inner cut area)
Min. linear rate 1μm/min
Linear force ≥16kgf
Max. stroke 90mm
Stroke resolution 0.078μm/μstep
Précision Stroke≥30% maximum stroke, Error≤±0.5%
Back distance 0.01-5mm
Mode de fonctionnement Independent working mode
Stored modes Can save 10 group working modes
Affichage Industrial grade 4.3"LCD color display
Méthode de contrôle Écran tactile et clavier mécanique
Mémoire non volatile Display the previous data parameter after power on again
Signal de commande externe Start/stop signal, active switch signal: (5-24V)
Interface de communication RS232/RS485, Modbus protocol(RTU mode)
Alimentation électrique du contrôleur DC5V/10W
Alimentation électrique du groupe de pompage DC24V/30W
Température ambiante 0 à 40 °C
Humidité relative <80%
Controller dimension 160×150×95(mm)
Controller weight 1.0kg
Pump unit dimension 249×128.9×118 (mm)
Pump unit weight 2.8kg

Dimensions(unité : mm)

Tutoriels vidéo

Infusion Demonstration
Real-time Parameter Adjustment
Common Modes Setup
Infusion Demonstration
Real-time Parameter Adjustment
Common Modes Setup